Dies ist eine alte Version des Dokuments!
TotoLink X5000R
Serial Interface: !TTL 3.3V! The communication settings are: 115200, 8N1
Factory Settings:
http://192.168.0.1/ Passwort: admin
Image File Flashen:
Menü → Advanced → Upgrade → Local Upgrade
Danach via:
192.168.1.1 einloggen
Damit es läuft muss man den firmware blob tauschen der mit -ct muss weg und gegen den ohne ersetzt werden. Erst dann geht ac und mesh!
Offensichtlich wird die zweite WLAN Karte nicht im normalen Release mit Kernel 5.4.x supportet in einer neueren Charge also mal Snapshot probiern Link: https://forum.openwrt.org/t/wireless-section-missing-on-x5000r-in-21-02/109729/5 Ich teste mal: https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-totolink_x5000r-squashfs-sysupgrade.bin
!Mit Snapshot gibt es keine GUI per Default! → https://openwrt.org/docs/guide-user/luci/luci.essentials
opkg update
opkg install luci
opkg update
opkg install luci-ssl
/etc/init.d/uhttpd restart
opkg update
opkg list luci-i18n-\*
opkg install luci-i18n-hungarian
opkg remove wpad-mini
War nicht drauf
opkg remove wpad-basic
War nicht drauf
opkg remove wpad-basic-openssl
War drauf
opkg install wpad-mesh-openssl
Muss wieder drauf
Wifi Config:
2,4GHZ
- Mode: AX
- Channel: 6
- Width: 40 MHz
- Mode: 802.11s
- MeshID: MeshingFerry
- Network: lan
- WPA3-SAE: MeshingFerry