Dies ist eine alte Version des Dokuments!
Unifi OpenWRT Meshing
Link: https://openwrt.org/toh/ubiquiti/unifiac
Links: https://www.cwnp.com/wp-content/uploads/pdf/802.11s_mesh_networking_v1.0.pdf Links: https://openwrt.org/docs/guide-user/network/wifi/mesh/80211s Links: https://wireless.wiki.kernel.org/en/developers/Documentation/ieee80211/802.11s
Non-invasive method using mtd
scp -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null BZ.qca956x.v3.7.58.6385.170508.0957.bin ubnt@192.168.1.20:/tmp/fwupdate.bin
ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null ubnt@192.168.1.20
fwupdate.real -m /tmp/fwupdate.bin
mtd write /tmp/openwrt-xxxxx-squashfs-sysupgrade.bin kernel0
mtd erase kernel1
dd if=/dev/zero bs=1 count=1 of=/dev/mtd4
root@OpenWrt:~# cat /etc/config/wireless
config wifi-device 'radio0' option type 'mac80211' option channel '36' option hwmode '11a' option path 'platform/ahb/18100000.wmac' option htmode 'HT20' option cell_density '0' option txpower '20' config wifi-iface 'mesh_radio0' option device 'radio0' option mode 'mesh' option mesh_id 'OpenWrtTest' option key 'OpenWrtTest' option mesh_fwding '1' option mesh_rssi_threshold '0' option encryption 'none' option network 'lan' config wifi-device 'radio1' option type 'mac80211' option channel '11' option hwmode '11g' option path 'pci0000:00/0000:00:00.0' option cell_density '0' option htmode 'HT40' config wifi-iface 'default_radio1' option device 'radio1' option network 'lan' option encryption 'none' option mode 'mesh' option mesh_id 'OpenWrtTest' option mesh_fwding '1' option mesh_rssi_threshold '0' option ifname 'OpenWrtTest'
Damit es läuft muss man den firmware blob tauschen der mit -ct muss weg und gegen den ohne ersetzt werden. Erst dann geht ac und mesh!