Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- unifiopenwrtmeshing [2021/11/30 13:07] – Fabian Horst
+++ unifiopenwrtmeshing [2021/12/01 07:50] (aktuell) – Fabian Horst
@@ Zeile 8: / Zeile 8: @@
 Non-invasive method using mtd
-Kopieren des alten Originalen Firmware Files was downgrades kann:
+Kopieren des alten Originalen Firmware Files was downgrades kann: (geht auch via cmd unter win10!)
 <code>scp -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null BZ.qca956x.v3.7.58.6385.170508.0957.bin ubnt@192.168.1.20:/tmp/fwupdate.bin</code>
 Verbinden via SSH für Kommando ausführung
@@ Zeile 15: / Zeile 15: @@
 <code>fwupdate.real -m /tmp/fwupdate.bin</code>
 Kopieren der OpenWRT Firmware:
-<code>mtd write /tmp/openwrt-xxxxx-squashfs-sysupgrade.bin kernel0</code>
+<code>scp -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null openwrt-21.02.1-ath79-generic-ubnt_unifiac-lite-squashfs-sysupgrade.bin ubnt@192.168.1.20:/tmp/openwrt-21.02.1-ath79-generic-ubnt_unifiac-lite-squashfs-sysupgrade.bin</code>
+<code>mtd write /tmp/openwrt-21.02.1-ath79-generic-ubnt_unifiac-lite-squashfs-sysupgrade.bin kernel0</code>
 <code>mtd erase kernel1</code>
 <code>dd if=/dev/zero bs=1 count=1 of=/dev/mtd4</code>
+Jetzt rebooten
+Running Config
 <code>
 root@OpenWrt:~# cat /etc/config/wireless
@@ Zeile 60: / Zeile 63: @@
 	option ifname 'OpenWrtTest'
 </code>
+X5000R
+<code>
+root@OpenWrt:~# cat /etc/config/wireless
+config wifi-device 'radio0'
+        option type 'mac80211'
+        option path '1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0'
+        option channel '1'
+        option band '2g'
+        option cell_density '0'
+        option htmode 'HE40'
+        option noscan '1'
+        option disabled '1'
+config wifi-iface 'default_radio0'
+        option device 'radio0'
+        option network 'lan'
+        option encryption 'none'
+        option mode 'mesh'
+        option mesh_id '1'
+        option mesh_fwding '1'
+        option mesh_rssi_threshold '0'
+        option disabled '1'
+config wifi-device 'radio1'
+        option type 'mac80211'
+        option path '1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0+1'
+        option band '5g'
+        option cell_density '0'
+        option country 'DE'
+        option htmode 'HE80'
+        option channel '52'
+config wifi-iface 'wifinet1'
+        option device 'radio1'
+        option key 'MeshingFerry'
+        option network 'lan'
+        option encryption 'none'
+        option max_inactivity '10'
+        option mode 'sta'
+        option ssid '23'
+config wifi-iface 'wifinet2'
+        option device 'radio1'
+        option mode 'mesh'
+        option encryption 'none'
+        option mesh_id '2'
+        option mesh_fwding '1'
+        option mesh_rssi_threshold '0'
+        option max_inactivity '10'
+        option network 'lan'
+</code>
+Running Config dazu muss das wpad-wolfssl gegen wpasupplicant mesh ersetzt werden.
+WICHTIG: Es muss bei dem 5 GHz Interface unbedingt eine andere BSSID gesetzt sein sonst klappt da keine Verbindung!!!